The Ultimate Container Home – 10 Module Luxury Courtyard Wellness Villa with Plunge Pool, 3 Bedrooms, Office, Art Studio & Recovery Room

About the The Ultimate Container Home – 10 Module Luxury Courtyard Wellness Villa with Plunge Pool, 3 Bedrooms, Office, Art Studio & Recovery Room

The Ultimate Container Home – 10 Module Luxury Courtyard Wellness Villa is a new luxury residence built by Outback Shipping Containers from 10 × 40ft high cube. Each module is fabricated, insulated, finished and inspected in the factory before dispatch. The modules are then delivered by flatbed and set by crane to form one single-level courtyard home, designed for full-time living, a private wellness retreat or a premium short-term rental.

Each of the 10 modules is a new one-trip 40ft ISO high-cube container (40'0" L × 8'0" W × 9'6" H shell, with an 8'6" finished ceiling) with a corten-steel frame and ISO 1161 corner castings. Openings are cut and reinforced for the multi-slide glass walls and full-height sliders. The two great-hall modules are joined side by side with a structural opening to create one 40ft x 16ft room. Framing, insulation, drywall, electrical, PEX-A plumbing and finishes are installed in the factory to residential code. The home is designed to 150 mph wind and Seismic Design Category D, with a PE stamp available per state on request.

Features & Inclusions

• • Ten 40ft high-cube modules arranged as a private courtyard compound
• • Approx. 2,400 sq ft conditioned living space plus approx. 1,200 sq ft of deck
• • 24ft multi-slide glass wall from the great hall onto the courtyard
• • Open living, dining and kitchen in one 40ft x 16ft hall
• • Master suite with walk-in closet and ensuite, plus two further bedrooms
• • Dedicated home office and north-lit art studio modules
• • Wellness recovery room with cedar sauna, cryotherapy chamber and infrared bay
• • 12ft x 24ft plunge pool set into the timber courtyard deck
• • Raked meditation garden and grounding fire-pit area
• • Covered outdoor lounge with an outdoor kitchen
• • 8.4 kW rooftop solar array with a 20 kWh battery and automatic islanding
• • Rainwater harvesting with filtration and UV treatment
• • Whole-home smart lighting, audio, climate and security integration
• • Walkable roof deck with guardrail over the great hall
• • Matte black corrugated shell with black anodised glazing throughout
• • Free standard delivery to the continental U.S. included
• • Mini-split HVAC for year-round comfort

Specifications

Catalog Model Number

OSC-HM-40-B5636820

SKU

OSC-UCH-10MOD-2400

Container / Unit ID

OSC-CID-101040

Product Class

Container Home

Condition

New

Modules

10 × 40ft High Cube

40ft Module Shell

10 × 40ft L × 8ft W × 9ft 6in H

Conditioned Living Space

Approx. 2,400 sq ft conditioned

Outdoor Space

Approx. 1,200 sq ft of timber deck and covered pavilion

Combined Weight

Approx. 82,000 lbs combined (10 modules)

Frame / Structure

Steel cargo-container or modular frame; alterations and reinforcement vary by model

Wall Construction

Steel exterior shell; interior wall build-up is model-specific

Roof Construction

Steel roof assembly; penetrations and added roof systems are listed when fitted

Floor Construction

Finished floor assembly varies with the selected build

Insulation

Closed-cell spray foam — R-21 walls, R-38 roof, R-19 underfloor

Doors

Thermally broken aluminium, low-E double glazed, U-0.28

Bedrooms

3

Bathrooms

3

Plumbing

PEX-A manifold system, on-demand condensing water heater, rainwater harvesting

HVAC

Zoned heat-pump mini-splits with ducted HRV fresh air

Electrical Supply Phase

Single-phase (1-phase)

Required Voltage

220V

Electrical Service

200A service, wing sub-panels, 8.4 kW solar, 20 kWh battery, EV ready

HVAC Circuit

Dedicated HVAC circuit feeding the included mini-split HVAC system (heating and cooling), installed and tested before dispatch.

Wind Zone

Zone II (Zone 2)

Wind Rating

150 mph (miles per hour), 3-second gust

Coastal Installation

For hurricane-prone coastal sites, confirm the local required design wind speed, exposure and applicable wind zone before ordering; some locations require Zone III or higher site-specific loads.

Foundation & Anchorage

Site-specific foundation, tie-downs and continuous structural connections must be designed for local wind loads, uplift and overturning by a licensed professional.

Placement

Prepared, level foundation and delivery or crane access required

Permits & Local Approval

Buyer must confirm local permits, setbacks, foundation and utility requirements before delivery

Utility Connections

Final site connections must be completed and inspected by locally licensed trades where required

Structural Warranty

15+ year structural warranty

Delivery

Free standard delivery to the continental U.S. by flatbed (ten truckloads), crane setting included

Delivery Estimate

About 8–15 business days (Free Flatbed Delivery with Crane Set)

Pool

12'-0" x 24'-0" plunge pool, 4'-6" deep, salt chlorination, heat pump ready

Wellness

Cedar sauna, cryotherapy chamber, infrared bay, tanked wet room

Electrical

200A service, wing sub-panels, 8.4 kW solar, 20 kWh battery, EV ready

Foundation

Pier pads at every ISO casting; slab or ground screws optional

Construction

CorTen ISO shells with welded W8x24 portal frames at removed walls

Design Loads

150 mph wind (Exp. C), SDC D seismic, 40 psf floor live

Living Space

Approx. 2,400 sq ft conditioned

Windows & Doors

Thermally broken aluminium, low-E double glazed, U-0.28

Overall Footprint

72'-0" x 72'-0" courtyard compound

Delivery method

Flatbed truck with crane

Straight approach (min.)

At least 80 ft

Access width (min.)

At least 12 ft

Overhead clearance (min.)

At least 15 ft along the route

Drop zone / setup area

crane pad 20 x 30 ft, level and firm, within 25 ft of the set point; no power lines within 20 ft of the lift path

Delivery note

Delivered on a 48–53 ft flatbed (about 75 ft overall) and set by crane, which Outback coordinates; the 10 modules arrive as 10 truckloads. Provide a level, firm 20 x 30 ft crane pad within 25 ft of the set point, with no power lines within 20 ft of the lift path.