1BHK Duplex Container Home with Rooftop Deck – Fully Furnished 2-Story Prefab Tiny House, Modular Kitchen & Bathroom

About the 1BHK Duplex Container Home with Rooftop Deck – Fully Furnished 2-Story Prefab Tiny House, Modular Kitchen & Bathroom

The 1BHK Duplex Container Home with Rooftop Deck – Fully Furnished 2-Story Prefab Tiny House, Modular Kitchen & Bathroom is a HUD-certified residence built by Outback Shipping Containers. Residential framing, insulation, electrical, plumbing and finishes are installed in the factory and inspected before dispatch.

The home uses the recorded modular configuration, with reinforced residential openings and factory-installed framing, insulation, electrical, plumbing and finishes. 2.3mm galvanized steel frame, bolt-together connectors, no welding

Features & Inclusions

• • Fully furnished two-story duplex — all built-in amenities and finishes in place, ready for your furniture and appliances
• • Approx. 528 sq ft conditioned living space over two levels (352 sq ft Level 1 + 176 sq ft Level 2)
• • 176 sq ft rooftop terrace over the living room with guardrail and exterior stair access
• • Open-plan living, an open-plan dining area and a modular kitchen on Level 1
• • 1 bedroom with built-in wardrobe on Level 2
• • 2 full bathrooms — one per level, stacked on a single plumbing riser
• • Separate utility bay with washer connection and water heater (water heater included as standard)
• • 3 bolt-together modules: two side by side per floor plate, one stacked above
• • 2.3mm galvanized steel frame with bolt-together assembly (no welding)
• • Closed-cell spray foam insulated sandwich panels walls with 18mm MGO board flooring
• • Energy-efficient plastic-steel windows and steel security entry door
• • Pre-installed electrical conduits and integrated drainage
• • Cedar-look exterior cladding
• • Free standard delivery to the continental U.S. included
• • Mini-split HVAC for year-round comfort

Specifications

Catalog Model Number

OSC-HM-40-9E8F3570

SKU

OSC-1BHK-DUP-592

Container / Unit ID

OSC-CID-101088

Product Class

Container Home

Condition

New

Exterior Length

39'-0" (11900mm) per floor

Exterior Width

9'-10" (3000mm)

Exterior Height

17'-9" (5420mm) — two stacked 8'-11" modules

Frame / Structure

Steel cargo-container or modular frame; alterations and reinforcement vary by model

Wall Construction

Steel exterior shell; interior wall build-up is model-specific

Roof Construction

Steel roof assembly; penetrations and added roof systems are listed when fitted

Floor Construction

18mm MGO board base with wood-look and premium vinyl finishes

Doors

Energy-efficient plastic-steel windows, steel exterior door

Bedrooms

1

Bathrooms

2

Kitchen / Cabinetry

Modular kitchen with soft-close cabinets and integrated sink; appliance spaces and connections provided. Appliances are not included.

Water Heater

Included as standard equipment — installed in the Level 1 utility bay

HVAC

Mini-split heating & cooling system, sized to floor plan

Electrical Supply Phase

Single-phase (1-phase)

Required Voltage

220V

Electrical Service

Pre-installed conduits, ready for utility connection

HVAC Circuit

Dedicated HVAC circuit feeding the included mini-split HVAC system (heating and cooling), installed and tested before dispatch.

Wind Zone

Zone II (Zone 2)

Wind Rating

120 mph (miles per hour), 3-second gust

HUD Code Reference

24 CFR 3280 — Manufactured Home Construction and Safety Standards; wind provisions: 24 CFR 3280.305

Code Scope

This container home is HUD certified and built to the HUD Manufactured Home Construction and Safety Standards. HUD wind zones apply to HUD-code manufactured homes; the listed 3-second-gust speed is a separate specification, not a direct equivalence to HUD zone criteria.

Coastal Installation

For hurricane-prone coastal sites, confirm the local required design wind speed, exposure and applicable wind zone before ordering; some locations require Zone III or higher site-specific loads.

Foundation & Anchorage

Site-specific foundation, tie-downs and continuous structural connections must be designed for local wind loads, uplift and overturning by a licensed professional.

Placement

Prepared, level foundation and delivery or crane access required

Permits & Local Approval

Buyer must confirm local permits, setbacks, foundation and utility requirements before delivery

Utility Connections

Final site connections must be completed and inspected by locally licensed trades where required

Structural Warranty

15+ year structural warranty

Delivery

Free standard delivery to the continental U.S. by flatbed, set by coordinated crane

Delivery Estimate

About 8–15 business days (Free Flatbed Delivery with Crane Set)

Access

External straight steel stair on the front long wall — 15 risers, no interior stair

Columns

2710mm x 160mm x 2.3mm galvanized steel with connectors

Kitchen

Modular kitchen with soft-close cabinets and integrated sink; appliance spaces and connections provided. Appliances are not included.

Modules

3 modules — two 5950mm modules on Level 1, one stacked on Level 2

Stories

2 (upper level built out over one module; the other half is the rooftop terrace)

Flooring

18mm MGO board base with wood-look and premium vinyl finishes

Electrical

Pre-installed conduits, ready for utility connection

Foundation

Pier pads or level slab; requirements vary by jurisdiction

Furnishings

All built-in fixtures and finishes included. Furniture and appliances are not included.

Wall System

Sandwich panel walls insulated with closed-cell spray foam

Construction

2.3mm galvanized steel frame, bolt-together connectors, no welding

Living Space

Approx. 528 sq ft conditioned over two levels (352 sq ft Level 1 + 176 sq ft Level 2)

Outdoor Space

Approx. 176 sq ft rooftop terrace over the living room

Ceiling Height

8'-2" finished (2500mm), module height 8'-11" (2710mm)

Windows & Doors

Energy-efficient plastic-steel windows, steel exterior door

Overall Footprint

39'-0" x 9'-10" per floor (11900mm x 3000mm)

Interior Dimensions

38'-5" x 9'-2" clear per floor (11700mm x 2800mm)

Delivery method

Flatbed truck with crane

Straight approach (min.)

At least 80 ft

Access width (min.)

At least 12 ft

Overhead clearance (min.)

At least 14 ft along the route

Drop zone / setup area

crane pad 20 x 30 ft, level and firm, within 25 ft of the set point; no power lines within 20 ft of the lift path

Delivery note

Delivered on a 48–53 ft flatbed (about 75 ft overall) and set by crane, which Outback coordinates; the 3 modules arrive as 3 truckloads. Provide a level, firm 20 x 30 ft crane pad within 25 ft of the set point, with no power lines within 20 ft of the lift path.